Commercial Intrusion Alarm Systems in Edmonton & Alberta
We design, install and support commercial intrusion alarm systems. They detect break-ins after hours and alert you the moment someone gets in.
An empty building after hours is when you are most exposed. We protect the ways in and out with door and window contacts, motion detectors and glass-break sensors, wired back to a monitored control panel. If someone forces entry, the system sounds and sends the alert right away.
Full intrusion protection, built around your building
Door and window contacts
Magnetic contacts on perimeter doors and windows trigger the moment a protected opening is forced or left open after hours.
Motion detectors
Interior motion sensors watch open floor areas, hallways and high-value rooms, catching anyone moving through the building once it is armed.
Glass-break sensors
Acoustic sensors listen for the sound and frequency of breaking glass, covering storefronts, ground-floor windows and other weak points.
Keypads and arming
Keypads at your entry points let staff arm and disarm the system with a personal code, so you know who set it.
Sirens and strobes
Loud interior and exterior sirens and strobes announce a break-in, driving off intruders and drawing attention while the alarm is active.
Monitored control panel
The control panel ties every device together and, with optional monitoring, sends alarms to a station that can dispatch response.
How we secure your building, step by step
Site survey
We walk your building, find every entry point and weak spot, and note what needs protecting inside and out.
System design
We lay out sensors, keypads and panel placement around your layout, hours and budget, and confirm the monitoring you want.
Installation
Our own technicians mount and wire every device, program the panel, and set arming codes for your staff.
Testing and support
We test every sensor and the alarm path, show your team how to use it, and stay on call afterward.
The crew behind your alarm system
We have protected Alberta businesses since 2006. Our own technicians do every install, no subcontractors, so the work is ours to stand behind and back with a lifetime labour warranty.
- In-house technicians who are trained, badged and never subcontracted.
- Lifetime labour warranty on every installation.
- 24/7 service and support across the province.
- Licensed and insured serving commercial and industrial clients across Alberta.
Intrusion alarms, answered
Do I need a monitoring service, or can the alarm just run locally?
Either works. A local system sounds sirens and sends alerts to you and your staff. With monitoring, a station also watches around the clock and can dispatch response when an alarm trips, even when no one is on site.
How do you keep false alarms down?
Good design. We place motion detectors to avoid heating vents, moving stock and other common triggers, use the right sensor for each area, and set arming schedules that fit how your building actually runs. We also test everything before we leave.
What happens if the power or internet goes out?
The panel runs on a backup battery, so a power cut does not leave you unprotected. For monitored systems, we can add a cellular path so the alarm still reaches the station if the internet line is down or cut.
Can we add to the system as our building changes?
Yes. We size the panel with room to grow, so you can add contacts, motion detectors or keypads as you renovate, expand or take on more space. New zones tie into the system you already have.
Lock down your building
Book a free site survey. We will walk your building, find the gaps, and give you a straight quote on the protection you need.
Book a Free Site Survey